Drive Fitting

Drive fittings are most commonly used by original equipment manufactures (OEM's) because they can be installed more quickly into unthreaded holes. The fittings are pounded or pressed into place using a drive tool. The barbs provide a locking grip. These fittings are sometimes called "press fit" fittings. Use only in light or medium pressure applications.

Precision Part # Description Alemite Part # King Fisher Part # Lincoln Part # Height Shank Hex
PS3019 1/8" Straight
(No Ball Check)		 3019 - - 15/32" 5/32" 3/8" Dia.
PS3009 3/16" Straight
(No Ball Check)		 3009 - - 25/64" 3/32" 5/16" Dia.
PS3005 3/16" Straight
(No Ball Check)		 3005 - 700375 15/32" 11/64" 3/8" Dia.
PS3006 3/16" Straight
(No Ball Check)		 3006 - - 31/64" 7/32" 9/32" Dia.
PS1728 3/16" Straight 1728-B 201728 5033 17/32" 1/4" 5/16" Dia.
PS1633 3/16" Straight
(No Ball Check)		 1633 - 5026 5/8" 1/4" 5/16" Dia.
PS1992 3/16" 45 deg. angle 1992-B1 - - 53/64" 7/32" 3/8"
PS1646 3/16" 65 deg. angle 1646-B1 - 5385 23/32" 7/32" 3/8"
PS1952 1/4" Straight
(No Ball Check)		 1952 201952 - 15/32" 1/8" 11/32" Dia.
PS1743 1/4" Straight 1743-B - 5029 35/64" 1/4" 11/32" Dia.
PS321381 1/4" Straight
(No Ball Check)		 321381 - 5044 35/64" 1/4" 11/32" Dia.
PS1445 1/4" 45 deg. angle - - - 29/32" 9/32" 3/8"
PS1744 1/4" 65 deg. angle 1744-B1 - 5318 27/32" 9/32" 3/8"
PS1608 5/16" Straight 1608-B 201608 5031 35/64" 1/4" 3/8" Dia.
PS1699 5/16" Straight
(No Ball Check)		 1699 201699 5030 35/64" 1/4" 3/8" Dia.
PS1666 3/8" Straight
(No Ball Check)		 1666 - - 37/64" 7/32" 7/16" Dia.