Finger Spring
Washers
 |
|
Finger Spring Washers are used for preloading ball
bearings and general applications. They counteract excess wear,
vibration, noise and end play. They promote efficiency and smooth
operation, reducing skidding wear on rotating elements. They are
also extremely useful in cases of unavoidable loose internal
clearances due to special application conditions. For preloading
ball bearings and general applications. |
| |
|
|
MATERIAL
1074 Spring Steel
FINISHES
Per Customer
Specifications |
|
|
For preloading ball bearings and
general applications
Stock sizes in high-carbon
steel
 |
| Precision Part # |
Outer Diameter (A) |
Inner Diameter (C) |
Stock Thickness (t) |
Load at Height of 0.062 in. |
For use with Bearing OD |
| PSFSW0728-006 |
0.728 |
0.344 |
0.006 |
4 to 8 |
0.7480 |
| PSFSW0846-006 |
0.846 |
0.453 |
0.006 |
3 to 7 |
0.8661 |
| PSFSW0846-008 |
0.846 |
0.453 |
0.008 |
9 to 13 |
0.8661 |
| PSFSW0926-007 |
0.926 |
0.453 |
0.007 |
6 to 10 |
0.9449 |
| PSFSW0926-010 |
0.926 |
0.344 |
0.010 |
22 to 28 |
0.9449 |
| PSFSW1004-006 |
1.004 |
0.516 |
0.006 |
5 to 9 |
1.0236 |
| PSFSW1004-007 |
1.004 |
0.516 |
0.007 |
8 to 12 |
1.0236 |
| PSFSW1164-009 |
1.164 |
0.688 |
0.009 |
9 to 13 |
1.1811 |
| PSFSW1164-010 |
1.164 |
0.406 |
0.010 |
15 to 21 |
1.1811 |
| PSFSW1164-018 |
1.164 |
0.688 |
0.018 |
60 to 75 |
1.1811 |
| PSFSW1240-008 |
1.240 |
0.688 |
0.008 |
10 to 14 |
1.2598 |
| PSFSW1240-009 |
1.240 |
0.563 |
0.009 |
15 to 21 |
1.2598 |
| PSFSW1240-010 |
1.240 |
0.688 |
0.010 |
15 to 21 |
1.2598 |
| PSFSW1360-011 |
1.360 |
0.814 |
0.011 |
11 to 15 |
1.3780 |
| PSFSW1360-014 |
1.360 |
0.814 |
0.014 |
17 to 25 |
1.3780 |
| PSFSW1555-014 |
1.555 |
1.971 |
0.014 |
15 to 21 |
1.5748 |
| PSFSW1555-018 |
1.555 |
1.000 |
0.018 |
31 to 39 |
1.5748 |
| PSFSW1830-016 |
1.830 |
1.189 |
0.016 |
17 to 23 |
1.8504 |
| PSFSW2022-019 |
2.022 |
1.359 |
0.019 |
17 to 23 |
2.0472 |
|
|
